Lesson 21 · Basics

Following a published setup in practice: size, late entries and slippage

How to act on a published entry, stop and target without improvising: size with your own risk, handle late entries and slippage, and never chase.

In short

  • Size a published setup from its stop with your own risk: lots = money at risk / (stop distance x value of a 1.00 move per 1.00 lot), rounded down to 0.01.
  • If even 0.01 lot risks more than your limit, skip the setup; never move the published stop to make the size fit.
  • When you are late, recompute reward-to-risk from the current price: in the example a 2.0 setup fell to about 0.88, so you skip or use a limit order at the published entry.
  • Your R differs a little from the published R because of your fill, your costs and lot rounding; in the example 0.60 of slippage and the 1.00 USD round trip turned +2.0 R into +1.89 R.
  • As of 13 October 2026 our public results page showed 9 closed setups, 5 wins and 4 losses, +1.78 R in total; nine setups is far too few to judge.

In lesson 20 you learned to convert pip values and results into your account currency. This lesson puts the whole module to work on one task: acting on a published setup without improvising. After it you will be able to size a published setup with your own risk, decide what to do when price has already moved past the entry, and explain why your result in R can differ a little from the published one.

The idea in plain words

A published setup gives three prices: entry, stop and target. It does not know your account, your risk or the second you saw it. Your job is not to copy the trade blindly. It is to translate the same plan into your own size, and to say no when the plan no longer fits.

Three rules carry the whole lesson:

  • Size from the published stop, with your own risk. The stop decides the distance; your account and your risk decide the lot.
  • Never move the published stop to make the size work. A closer stop is a different trade, and not the one that was published.
  • Never chase. If price has run away from the entry, the setup at the new price is worse, and often it is no setup at all.

ESMA's investor pages say plainly that ESMA "cannot tell you what investments to make". In the same way, a published setup does not tell you what to do with your account; the decision and the risk stay with you.

Sizing a published setup

1 R is the planned risk between entry and stop, set before the trade. The real loss at the stop is usually a bit larger because of the round-trip cost (spread, commission and slippage), and can be much larger with slippage or a gap.

As in lesson 19, your risk is a percentage of your account, chosen before you look at any setup:

lots = money at risk ÷ (stop distance × value of a 1.00 move per 1.00 lot)

On our MT5 account at our broker TegasFX (specifications read 3 October 2026) one lot of gold is worth 100 USD per 1.00 move, and one lot of US100 is worth 100 USD per point.

Round down to the lot step of 0.01, and if even 0.01 lot risks more than your limit, skip the setup.

Late entries and slippage

You will rarely fill at exactly the published entry.

Slippage. The MetaTrader 5 help defines deviation as "the difference between the order execution price and the specified price to which a trader agrees". With a market order your fill can be a little better or worse than the published entry. A worse fill moves you closer to the target and further from the stop, so the same stop costs more and the target pays less.

Late entries. Sometimes you see the setup after price has already moved. Before you do anything, recompute the plan from the current price (for a buy the ask, for a sell the bid, as in lesson 3):

  1. Distance from the current price to the published stop: this is your new risk per unit.
  2. Distance from the current price to the published target: this is your new reward.
  3. New reward-to-risk = reward ÷ risk.

If the new ratio is clearly worse than the published one, or below the minimum you set for yourself, skip the trade. If you still want the published price, a limit order at the published entry (lesson 5) gets that price or nothing. A missed setup costs nothing. A chased setup can cost you a full stop on a trade with half the reward.

Why results are in R, and why yours can differ

Results are reported in R so they can be compared across gold, indices and forex and across account sizes. A setup that reaches its target at twice the stop distance is +2 R before costs, whether you trade 0.01 lot or 1 lot.

Your own R can still differ slightly from the published R because of:

  • Your fill: slippage on entry, and on the stop too: as FINRA notes, a stop order becomes a market order once the stop price is reached.
  • Your costs: the round trip at your provider.
  • Your size: rounding down to 0.01 lot steps changes the money at risk a little.

Our closed setups from our MT5 account at our broker TegasFX are on our public results page, losses included; changes are listed in a public corrections log. As of 13 October 2026 there were 9 closed setups: 5 wins and 4 losses, +1.78 R in total, which is about +0.20 R per setup (1.78 ÷ 9). Nine setups is a very small sample, so these numbers say little about what comes next.

Worked example

Our broker's measured round-trip cost on gold in 2026 (our MT5 account at our broker TegasFX) is 0.50 USD per 0.01 lot (spread, commission and typical slippage, open and close).

Example: a published gold setup says buy at 4,400.00, stop 4,390.00, target 4,420.00. The stop is 10.00 away and the target 20.00 away, so the published reward-to-risk is 20.00 ÷ 10.00 = 2.0. Your account is 2,000 USD and you risk 1% per trade, which is 20 USD.

Step 1, size. lots = 20 ÷ (10.00 × 100) = 0.02 lot, so 1 R = 20 USD, the planned risk at the published entry. We keep dividing by 20 below because that is the risk you decided before the trade. At 0.02 lot the round trip is 2 × 0.50 = 1.00 USD.

Step 2, on time with slippage. Your market order fills at 4,400.60, 0.60 worse than published.

  • Risk to the stop: 4,400.60 − 4,390.00 = 10.60 × 2 = 21.20 USD (at 0.02 lot each 1.00 move is 2 USD).
  • Reward to the target: 4,420.00 − 4,400.60 = 19.40 × 2 = 38.80 USD.
  • If the target is hit: 38.80 − 1.00 = 37.80 USD, which is 37.80 ÷ 20 = +1.89 R, against +2.0 R published before costs. Costs alone would give (40.00 − 1.00) ÷ 20 = +1.95 R; the 0.60 slippage takes it to +1.89 R.
  • If the stop fills exactly at its price: −21.20 − 1.00 = −22.20 USD, which is −22.20 ÷ 20 = −1.11 R. Slippage at the stop can make it worse.

Step 3, late instead. You see the setup when gold is already at 4,406.00.

  • New risk: 4,406.00 − 4,390.00 = 16.00. New reward: 4,420.00 − 4,406.00 = 14.00.
  • New reward-to-risk: 14.00 ÷ 16.00 = about 0.88, against 2.0 published.
  • New size: 20 ÷ (16.00 × 100) = 0.0125, rounded down to 0.01 lot, which risks 16 USD.

You would risk more distance for less than half the reward. Your own minimum is, say, 1.5, so you skip, or place a buy limit at 4,400.00 and accept that it may never fill.

Common mistakes

  • Moving the stop closer to keep the old size or ratio. The published stop is part of the setup. A closer stop is hit by smaller moves, so it is a different and untested trade.
  • Rounding the lot up. 0.0125 lot rounded up to 0.02 lot would risk 32 USD instead of 20 USD, 60% more than planned. Always round down.
  • Chasing a setup that has already run. In Step 3 the ratio fell from 2.0 to about 0.88. If the reward no longer pays for the risk, there is nothing left to follow.
  • Doubling the next trade to "catch up" after a missed one. A missed setup is not a loss. Keep the same risk on the next one.
  • Expecting your R to match the published R exactly. Fills, costs and lot rounding make small differences normal. Compare over many trades, not one.

Exercise

Example: on paper, a published US100 setup says sell at 29,500, stop 29,540, target 29,420. Our measured US100 round trip is 1.83 USD at 0.01 lot. Answer three questions: (a) with a 3,000 USD account risking 1%, what size do you trade? (b) with a 6,000 USD account risking 1%? (c) with the 6,000 USD account, you see the setup when US100 is at 29,470; take it or skip it?

Solution:

  • (a) 1% = 30 USD. lots = 30 ÷ (40 × 100) = 0.0075, below the minimum. At 0.01 lot the risk would be 40 USD, about 1.33% of 3,000 USD, above your limit, so you skip.
  • (b) 1% = 60 USD. lots = 60 ÷ (40 × 100) = 0.015, rounded down to 0.01 lot, which risks 40 USD, about 0.67% of 6,000 USD.
  • (c) For a sell, the new risk is 29,540 − 29,470 = 70 points and the new reward 29,470 − 29,420 = 50 points. 50 ÷ 70 = about 0.71, against 80 ÷ 40 = 2.0 published. The size fails too: 60 ÷ (70 × 100) = about 0.0086 lot, below 0.01, and 0.01 lot would risk 70 USD, about 1.17% of 6,000 USD. You skip.

Quick quiz

  1. A published gold buy has its stop 12.00 below the entry. Your account is 5,000 USD and you risk 1%. What lot do you trade, and how much do you risk? Answer: 1% = 50 USD; 50 ÷ (12.00 × 100) = about 0.042, rounded down to 0.04 lot, which risks 12.00 × 4 = 48 USD, 0.96% of the account.

  2. A US100 sell is published at 29,500 with the stop at 29,540. You trade 0.01 lot, so 1 R = 40 USD, but your fill is 29,497. The stop fills exactly at its price. What is your result in R with our 1.83 USD round trip? Answer: your distance to the stop is 29,540 − 29,497 = 43 points, so 43 USD at 0.01 lot; −43 − 1.83 = −44.83 USD; −44.83 ÷ 40 = about −1.12 R.

  3. You see a setup late and price is already most of the way to the target. What do you do? Answer: recompute the reward-to-risk from the current price with the published stop and target. If it is well below the published ratio or your minimum, skip, or place a limit order at the published entry. Never move the stop to make the numbers work.

Summary

Act on a published setup with three rules: size from the published stop with your own risk, never move the stop, never chase. Round the lot down, and skip when even 0.01 lot risks more than your limit. Recompute the reward-to-risk from the current price whenever you are late. Your R will differ a little from the published R because of fills, costs and lot rounding, and nine setups are too few to judge any record. The next lesson explains the maths of drawdown: why −50% needs +100%.

Questions

Should I enter at market if I am a few seconds late?

Only after you recompute the reward-to-risk from the current price with the published stop and target. If it is still close to the published ratio and above your own minimum, a market order is fine; otherwise skip or use a limit order at the published entry.

Can I use a tighter stop than the published one to trade a bigger size?

No. The stop is part of the setup. A tighter stop is hit by smaller moves, so it is a different, untested trade, and the published result in R no longer describes it.

Why is my result in R not the same as the published one?

Because your fill, your costs and your lot rounding differ a little. Small differences are normal; compare results over many trades, not one.

Sources

  1. Executing Trades - Trading Operations - MetaTrader 5 Help — MetaQuotes (MetaTrader 5 Help)
  2. Investor corner — European Securities and Markets Authority
  3. Stop Orders: Factors to Consider During Volatile Markets — Financial Industry Regulatory Authority (FINRA)

Written and reviewed by AI agents (Claude and Gemini models) under rules set by the owner; no person reviews each text. Last AI review: 27 Oct 2026. Sources are listed at the end of the article.